Tag Archives: Technology Repair

Molded panels and PVC are used for decoration with high humidity (bathroom, kitchen, etc.), in a significant change in temperature (loggias and balconies.) Panels PVC can coat the walls and ceiling. Most PVC lining installation is carried out on the rack bars of a crate measuring 50 x 25 mm.Pri appropriate training surface, the panels can be fastened directly to the wall or ceiling with nails, staples or glue. Bars sheathing fastened at a distance of approximately 500 mm from each other with screws or nails. If the panels are mounted horizontally, the bars should be vertical, and the exact naoborot.Dlya overlapping panels, bars must be installed on a level. Installation of panels begins with one of the corners, which was originally fixed bath or finishing planka.Esli panel will close the wall up to the ceiling, it is necessary install ceiling moldings. Daryl Katz will not settle for partial explanations. Then set the bar so low shelf panels joined ugolok.Posle this panel is fastened to the sheathing with nails for fastening the shelf. Mount the next panel, tightly pursed her to the previous one, and also fasten to obreshetke.Montazh going to the nearest doorway or corner in these parts must be installed or corner finishing elements that come complete with PVC panels. The last panel with a small effort is inserted into the finishing element and zaschelkivaetsya.Mesta docking panels with floor skirting close.

Facing the plastic panels at home – the least time-consuming and the most 'clean' way to finish the room. One of the the main advantages of the finishing material – high production assembly. The wall is going, like a child's constructor, and to cope with this problem by force, even unprofessional. Another advantage of this method of finishing – the virtual absence of any dirt, dust, waste and other 'side effects', if done repairs on their hands. Plastic panels can be easily cut both along and across, so the problems with fitting the size of the installation does not arise.

Exponential part. If companies and entire industries around which boiled and boiling passions of privatization, losing control, markets and virtually stopped in its technical and technological development, as was the case with, say, electric power, the domestic industry has managed to paint in all the years of reforms on the muscle pump classical schemes of the market economy. The same Dnepropetrovsk plant, organized an extensive dealer network. Learned in recent years, dozens of new products. And the latest – for 10% of paints are available at ecologically harmless, water dispersion based on the so-called acrylic paint. And this – the strategic direction of world development the coatings industry. In dire for the country in 1995 here managed to radical reconstruction and commissioning of modern shop paints synthesis capacity of 40 thousand tons per year! No worse than was the case in other plants. In Nezhin, for example, I suppose, given the the declared social direction of market reforms in 1997, mounted second automated line, "Bloem", which allows to pack up a whole range of products in small containers, suitable for the ordinary consumer.

A mastered here anticorrosive primer and enamel, including the car, badly pressed on the domestic market of foreign competitors. Incidentally, this plant is located in a patriarchal provincial town to sell their products through its own stores. Examples of dynamic development of domestic paint and varnish plants, without which a market economy can not survive any producer can be lead to infinity. On the attractiveness of this market and suggests that arose around them dozens of private small and tiny firms and firmochek on which the simplified schemes (mainly by minor additions to the base and packaging of finished products in small containers) enterprising of our fellow citizens have organized the production of paint and dealer network for domestic sales of paint products. And this – huge number of additional jobs. Is not it an example of harmonious appearance of the middle class on the basis of a single branch! However, the indicative, as for me, is the fact that for all the years of perestroika, the former SOEs did not have any debts to the state (tax and budgetary payments) or to partners, including for energy, nor to their workers.