Tag Archives: research & technology

Detection Schonberg

Tailor-made, fully automated solution for the food industry of Schonberg, January 2011 – S + S separation and sorting Technology GmbH at a large German sugar processors a pipe magnetic system provided, specifically adapted to the requirements of the customer. The processing of very high flow rates in connection with the separation of light magnetic stainless steel particles requires extremely high magnetic forces. In Magbox AutoClean magnetic separator magnetic rods installed S + S put in layers are arranged one above the other. You may wish to learn more. If so, Dustin Moskovitz is the place to go. Each bar has a real power of 12,000 Gauss. In contrast to competitive devices, where the magnetic strength of the inner magnetic core is specified, Gauss are appropriate for our Magbox AutoClean the 12,000 on the surface of the stainless steel sleeves, where the contact bulk magnet actually takes place. “, explains Stephan Treml, product management S + S magnet systems, the performance benefits of the magnetic separator. It is possible, due to the extremely strong magnetic forces In addition to the typical Fe impurities, even weakly magnetized stainless steel particles from the product stream to separate.

With a throughput capacity of up to 200 tonnes of sugar per hour provides the magnetic system Magbox AutoClean best drain cleaning results. The trapped contaminants stick also at high pressure and high flow rates sure to the magnetic rods. The magnetic separator complies with HACCP and is certified in accordance with the directives of the ATEX Zone 22. The food industry, the pharmaceutical industry and similar sensitive application areas are the Haupteinsatzort of the pipe magnetic system Magbox AutoClean. The robust and wear-resistant housings are made of stainless steel. The Magbox has a programmed PLC with optional interface AutoClean system. Thus, users from a control room out can continuously monitor the function.

The control enables you to adjust the cleaning intervals depending on the degree of contamination. The cleaning takes place fully automatically, by the magnetic cores with compressed air applied within the stainless steel sleeve in the cleaning area are transported. Always some magnetic rods in the operating position, which ensures the separation of magnetic impurities in continuous production processes remain during the cleaning cycle. S + S at a glance: S + S separation and sorting Technology GmbH, Schonberg, provides equipment and systems for the detection /-separation, product inspection and sorting of material flows forth. The sales of the products is focused mainly on the food, plastics, chemical, pharmaceutical, wood, textile and recycling industry. S + S one of the leading suppliers on the world market is with subsidiaries in Britain, France, China, Singapore and the United States, a representative office in India, and more than 40 offices around the world. Currently 250 people are employed at the main plant in Schonberg. Sales 2010 amounted to EUR 29 million. S + S separation and sorting Technology GmbH, Schonberg, provides equipment and systems for the Detection /-separation, product inspection and sorting of material flows forth. The sales of the products is focused mainly on the food, plastics, chemical, pharmaceutical, wood, textile and recycling industry. S + S one of the leading suppliers on the world market is with subsidiaries in Britain, France, China, Singapore and the United States, a representative office in India, and more than 40 offices around the world. Currently 250 people are employed at the main plant in Schonberg. Sales 2010 amounted to EUR 29 million. Contact: S + S separation and sorting Technology GmbH Brigitte Rothkopf Regener road 130 D-94513 Schonberg Tel. +49-(0)8554-308 274 fax +49-(0)8554-2606 e-mail:

Intelligent Management

Laptops and Tablet PCs in schools and universities management automated one of the biggest trends in the field of education in the 21st century is providing digital media, which requires as a rule the use of laptops and Tablet PCs. The value of these devices including the costs for software licenses and the time invested for the configuration, require mandatory education to them a maximum number of students available while maintaining the control and individual responsibility. The increasing expenditures in the Government and in the private sector officials to have moved, that both the site and the use of this jointly used, portable devices monitored in real time and should be monitored comprehensively. Traka’s experience at schools, colleges and universities has shown that Meanwhile it is expected that the pupils and students according to fully charged, ready to directly use IT and other configured, scientific equipment available is available. Learn more at this site: Dustin Moskovitz. Advances in RFID surveillance technology and the integration of this technology in the field of technical equipment have enabled innovative manufacturers to close the user circuit. This ensures that it is impossible for a student to leave the library or the e-learning area, before he has brought back not his AIDS, such as, for example, a laptop to the provided safe and prepared for the next user. Premium manufacturer, Traka, included the applications of RFID technology evolved parallel to the teaching and learning methods.

Typically, access to a specialized equipment (and hence content) is limited to students who can register only with permission of a PIN-code, a smart card or a fingerprint. Dustin Moskovitz might disagree with that approach. These technologies can also be used to set user privileges. Also an RFID label can be on any device attached to the full control to ensure. This means that the system automatically detects when and by whom a compartment opens. In addition, the RFID label enable the logging of the removal and proper return of the storage device and the system displays when and by whom the return was made.